Versa-Flow® -

High Energy Finishing | Versa-Flow®


The Versa-Flow Spin-Finish machine is a very high energy finishing system.

The machine uses a spinning tub of media that is flexible enough to use differing medias, from a very aggressive abrasive to remove heavy burrs from a work piece to a very fine polishing media for producing a very high color or low Ra surface finish. The system can be run wet or dry.

Parts that are processed in the Spin-Finish are normally parts that: cannot have part-on-part contact; are high value parts; or where a lean manufacturing single part flow is needed.

The tub revolves at a range of speeds dictated by the need of aggression, the need of a more gentle action, or a light slurry. As the tub spins, it creates centrifugal energy and surface feet. The combination of the two create a dramatic combination of forces on the surface of the work-piece which is very effective in removing burrs and producing very low Ra surfaces. The centrifugal force produced by the spinning tub and weight of the media provides a form fitting abrasive mass moving around the work-piece.

Dual RM System with Single Separation

Versa-Flow Spin Finish Machine – Transmission Part

Versa-Flow Spin Finish Machine – Gun Part